UAH Archives, Special Collections, and Digital Initiatives

Browse Items (970 total)

  • "Outline of the capability of technical facilities and equipment at the George C. Marshall Space Flight Center."

    Outline of the equipment present at George C. Marshall Space Flight Center.
  • "Manufacturing plan : Saturn V : booster stage S-IC. Volume 2."

    Manufacturing plan for Saturn V Booster stage S-IC
  • "Manufacturing plan : Saturn V : booster stage S-IC. Volume 1."

    This procedure provides the necessary information for the fabrication and assembly of the Saturn C-5 booster stage S-IC. The manufacturing methods outlined herein represent techniques that will be utilized both at Michoud and MSFC wherever possible. The concepts and methods outlined are of a preliminary nature consistent with the stage of design at this time. These concepts and methods are subject to change. This Manufacturing Plan will be periodically updated to reflect such changes. The processes and techniques proposed in this Manufacturing Plan are generally within the present state of the art, consistent with reliability requirements for manned space flight and advocated for use with the limited manufacturing facilities of the Marshall Space Flight Center and the Michoud Production Facility.; Includes memorandum dated 15 Jan. 1963 from J. H. Chesteen, Chief, Engineering Planning Section. M-ME-SE.; Includes memorandum from J. H. Chesteen and N. E. Johansen to W. B. Edmiston and W. R. Kuers--subject: Integration Boeing-MSFC Manufacturing plan. December 18, 1962.
  • "Master plan for documentation management and use."

    Prepared for National Aeronautics and Space Administration, George C. Marshall Space Flight Center, Huntsville, Alabama. Accepted by V.C. Sorensen, Chief, Management Services Office. Management Services Project, RCA; SUMMARY: The objective of this study is to describe a comprehensive plan for the development and full utilization of methods and means to be employed in the years prior to 1976 for the effective acquisition, collection, storage, retrieval, distribution, and use of engineering documentation. Because of the violently changing state of the art of data acquisition, storage, and retrieval the description of the plan does not embrace the details of a total decade of phased change. Rather it describes actions that can and should be taken in the relatively near future, and proposes a continuing series of later studies to keep this plan current for the full decade.
  • "Evolution of the Saturn Booster."

    8 x 10 inch Black & White photograph. MS-G 103-63 Nov. 22, 63 is on the photograph. Displays the evolution of space-rocket designs side-by-side.
  • F-1 engine photograph.

    8 x 10 inch black and white photograph. Engine parts are labeled.
  • Double seal insulation [drawing] photograph.

    8 x 10 inch black and white photograph.; Drawing contains information about the modified epoxy adhesive, aluminum film, mylar film, perforated phenolic honeycomb core, tank skin, mylar honeycomb core, polyurethane adhesive, weight and thermal conductivity.; Photo negative no. 651746 M-268.
  • "Conditions contributing to stress corrosion [list] photograph."

    8 x 10 inch black and white photograph. A photograph of a list of things contributing to stress corrosion. Referenced by "Materials in Space Exploration." Is part of envelope containing photos accompanying C. E. Cataldo paper "Materials in Space Exploration."
  • Spaceflight: DDC report bibliography.

    Bibliography containing space crews, space flights, satilites, cryogenic propellants, propaganda and the USSR.
  • Technical information Summary Apollo-11 (AS-506) Apollo Saturn V Space Vehicle.

    The document's mission summary states "This documet is perpared jointly by the Marshall Sapce Fligh Center Laboratories S&E-ASTR-S, S&E-AERO-P, and S&E-ASTN-ESD. The document presents a brief and concise description of the AS-506 Apollo Saturn Space Vehicle and the AS-506 mission. Where necessary, for clarification, additional related information has been included. It is not intended that this document completely define the Space Vehicle, its sytems or subsystems in detail. The information presented herein by text and sketches, describe launch preparation, ground support activities, and the space vehicle. This information permits the reader to follow the sequence of events beginning a few hours before liftoff to mission completion."
  • "Apollo Program Management Volume 3."

    According to the introduction found on page ii, this document was created to detail the "MSFC segment of the total Apollo Management process and to describe the methodologies and techniques currently being implemented."
  • "AS-203 Technical Information Summary."

    "This report outlines, through a series of sketches with accompanying text, the general features of the SA-203 Launch Vehicle and information on launch preparation, the launch facility and mission peculiar experiments."
  • "S-IC stage, S-II stage, S-IVB stage, instrument unit drawing."

    8 x 10 inch black and white photograph.; Image includes dimensions and labels of exterior features of the rocket.
  • "Science and technology advisory committee for manned space flight."

    This publication contains the Marshal Space Flight Center contribution at the Science and Technology Advisory Committee (STAG) at the Manned Spacecraft Center.
  • "Saturn V America's moon rocket."

    Diagram that displays the Saturn V rocket with a page beneath detailing the function of each stage.
  • "Saturn I workshop experiments."

    April 1, 1968.; Stamped on first page is From the Archives of Frederick I. Ordway, III.
  • "Saturn I summary."

    Summary of the history of the Saturn 1, its missions and its construction.
  • "Saturn I workshop, 1968."

    The Workshop project calls 'for changing a spent Saturn S-IVB propulsion stage into a living area after it has propelled itself into space.
  • "Saturn I workshop, 1969."

    The Workshop project calls for changing a spent Saturn S-IVB propulsion stage into. living and working quarters after it has propelled itself into space.
  • "Organizational Structure and Mission of Aerospace Environment Division"

    This document offers a brief description of the Aerospace Environment Division including the basic mission; branches; an organizational directory; and responsibilities of the Environment Research Office, the Atmospheric Dynamics Branch, the Terrestrial Environment Branch, and the Space Environment Branch. William W. Vaughan's name is inscribed on the front page.

Proudly powered by Omeka.